At present, the titanium processing industry is gradually maturing in China, and there are more and more domestic titanium plate processing enterprises. Today, I will tell you about the things to pay attention to when welding titanium plates.

According to titanium plate manufacturers, the common density in titanium plate processing is 4.5, with a silver gray color. The size is 2 meters long and 1 meter wide, and the thickness varies according to actual needs. The requirements for welding are as follows:

1： The welding surface of titanium plate needs to be free of oxide skin; No cracks; The thickness between butt welds shall not exceed 3 millimeters.

2： The environment for titanium plate welding requires the temperature of the welding chamber to be between 5 and 30 ℃; The welding room must be clean, dust-free, and kept in a dry environment; The protective cover should be made of titanium plate as much as possible.

3： The welding wire for titanium plate welding requires acid cleaning of the surface; The welding wire should be free from cracks and oxidation, and it is best to use a material equivalent to the base material.

4： The titanium plate manufacturer introduced that the argon protection requirement for titanium plate welding requires three layers of protection during the welding process, namely the upper layer, lower layer, and welding gun with argon gas. The upper and lower protection workers should follow the image area of the welding gun to ensure the protection of argon gas under high welding temperatures and prevent oxidation. The purity of argon is 99%.